PRODUCT OVERVIEW

Where air is required to affect static removal at a distance and compressed air is not available, the Haug Ion Blower can be used with either the standard Model RN static bar or the extra powerful Model VS bar. These units are easy to mount and simple to operate with an adjustable fan. The bar is located outside the blower for easy maintenance and cleaning. Three different sizes are available – small, medium and large lengths.

NOTE: If strong blow-off force is required and compressed air cannot be utilized, Nex Flow Air Products Corp. partners with companies that can supply regenerative blower systems.

Special Notes: Haug static bars all come with a patented connector to assure safety in operation and maintenance. Field repairable, it prevents a connection if the static bar is removed or attached while power is still on at the power supply.

Cable is FULLY SHIELDED unlike some manufacturers which claim shielding which may only be partial. This results in much longer life for Haug products.

REPAIRABLE POWER SUPPLIES – almost unheard of in the industry, Haug power supplies are repairable and come with a 2 year warranty.

PRODUCT OVERVIEW

A Low Cost but powerful static eliminator that rapidly removes static charge and cleans.
The Standard Air Blade™ Ionizer combines the superior designed Standard Air Blade™ Air Knife the quality Haug static bars – the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds. The standard Air-Blade™ Air Knife uses slightly more compressed air than the Silent X-Stream™ Air Blade™ and has a higher sound level but still produces a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.

STANDARD AIR-BLADE™ IONIZER

The Standard Air-Blade™ Ionizer combines the superior designedStandard Air-Blade™ Air Knife with a quality static bar made by Haug, a world leading static control manufacturer. Charges can be eliminated quickly, even over large distances and surface area.

SILENT X-STREAM™ AIR-BLADE™ IONIZER

The Silent X-Stream™ Air-Blade™ air knife provides increased efficiency and very low noise levels compared to the Standard Air Blade™ air knife. Both units utilize the quality Haug static bars – the RN bar for most applications or the extra strong VS bars (Triple X versions) for very haigh static charges and extremely high speeds.

PRODUCT OVERVIEW

The Ring Ionizer – Ionizing Nozzles are a highly effective the discharging and cleaning of surfaces – in particular of non-conductive
materials. The Nozzles can also be mounted to a handgun if they need to be converted to manual use.

Ring Ionizer Model 17200 and Model 17203 (with Air Gun) This "mini"

version is particularly suited for the discharge of very small areas and components in confined work spaces. It is light, flexible and easy to handle, and its robust design makes this unit the Ionizer of choice for many discharge processes.

Ring Ionizer Model 17195 and Model 17196 (with Air Gun)

This ring Ionizer is light, robust and easy to handle with ergonometric design when used with an Air Gun.

Ring Ionizer Model 17194 and Model 17187 (with Air Gun)

The largest Nozzle, very heavy duty and robust for larger area applications.

PRODUCT OVERVIEW

Ionizing Air Gun Model LG

The LG "Light-weight Gun" ionizing air gun

The HAUG LG ionizing air gun is light weight and easy to handle with its service-friendly handling, is a peerless innovation in the field of elimination of dust and charges. Heavy-duty users and others will appreciate its lightweight at only 480 grams (before air hose and HV cable).

Ionizing Air Gun Function

This product is based on the neutralization of "spot charges" by means of bipolar ions.

The head of the device is enclosed by a sheet material shield, which serves both as mechanical protection and counter-electrode. Due to the special shape of this shield, bypass channels are created, which assist an efficient six-chanel blowing nozzle by stabilizing the airflow. The airflow can be adjusted exactly in accordance to the application – particularly useful for the treatment of small pieces. A power pack provides the required voltage.

PRODUCT OVERVIEW

The One-Point-Ionizer OPI was developed for the neutralization of the smallest of parts. Emitting positive and negative ions, this unit reliably neutralizes spot charges.

This ionizer is perfectly suited for mounting in places where there is little room. The plug of the electrode must simply be connected to the high voltage transformer (power pack) and the unit can be quickly set into operation without tools.

The One-Point-Ionizer OPI has proven its value repeatedly in daily use, e.g. in the medical industry. The OPIcan also be equipped with compressed air (Mini-Jet Ionizer).

NOTE: The pin carries high voltage and must not be touched while in operation.

PRODUCT OVERVIEW

The Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It's compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an "air amplifier" (Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.

In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit "plastic PET head" of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.NN

PRODUCT OVERVIEW

Nex Flow™ uses quality Power Supplies from Haug that have several unique features unavailable in competitive units.

HAUG POWER SUPPLIES ARE

1. Repairable - parts are replaceable

2. Several versions - units available with four outlets, two outlets, with or without function monitoring, and in 220V and 110V versions

3. Patent Safety X-2000 Connection - prevents accidental shocks when connecting or disconnecting a static eliminator to the power supply

4. High Reliability and Life - so reliable that we even offer a two year warranty on the power supplies

HIGH VOLTAGE POWER PACK TRANSFORMERS EN - C (2 OUTLET) AND EN-C4 (4 OUTLET)

Static Control Power Supply EN-C type High Voltage Power Pack. The integrated high-voltage transformer coverts applied mains voltage to approx. 7,000 to 8,000 volts. The unit is equipped with two or four high-voltage terminals and integrated on - off pilot lamp. Transformers are equipped with a modular-type highvoltage transformer. It consists of three main modules, all of which can be replaced individually. This unit is electrically approved for North American installations.

S-LINE POWER PACK EN SL

The S-Line power pack comes with two high-voltage connections and meets both North American and European standards. The integrated high-voltage transformer coverts applied mains voltage to approx. 7,000 to 8,000 volts. Integrated on - off pilot lamp. S-Line power pack EN SL LC - Same as the SL, but with integrated full-electronic function monitoring to constantly monitor all functions of the ionizing system. It alerts the operator of any irregularities by causing the LED indicator integrated in the housing to flash EN SL RLC - Identical in all technical aspects to the EN SL LC plus a signal socket above the earthing sleeve. A fault message can be connected to the signal socket.

MULTISTAT POWER SUPPLY

The Multistat power pack provides the optimum in power pack performance and monitoring. The Multistat EX is approved for explosion proof applications (but must be mounted outside the explosion proof area).

EN - 92 EX POWER SUPPLY

Power pack EN 92 Ex is suitable for direct use in areas with potentially explosive atmospheres (zones 1 or 2).

The units comply with the International ATEX directives. All high-voltage components are accommodated in a flameproof housing. The power pack EN 92 Ex is equipped with two highvoltage ports for the connection of the ionizing units. No long high-voltage cables are required, as the power pack can be installed in the immediate vicinity of the ionizing unit.

PRODUCT OVERVIEW

HAUG RN Static Bar

The HAUG RN ionizing bars is a powerful and rugged piece of equipment. Its construction satisfies all technical requirements and it has proven its value repeatedly in the removal of electrostatic charges during roll, sheet and web (continuous product) processing. Production interfering surface charges can be removed reliably and effectively, even at high operating speeds.

The coaxial high-voltage plug-and-socket connection of the HAUG system X-2000 offers a unique advantage in that the gastight high-voltage plug can be connected to the HAUG power pack easily and without tools. The flexible, coaxially shielded cable connects the ionizing unit with the voltage supply.

The round construction of the RN ionizing bars permits the exact axial adjustment in the direction of travel of the material. The ionizing bars is safe to touch. Special wear-resistant electrodes guarantee long service life.

HAUG VS Static Bar

The HAUG VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is three times the power. This tremendously improves the static removal and designed to address extremely high charges, faster speeds and greater distances.

The VS ionizing bar has all of the typical features that characterize HAUG ionizing bars: the reliable and removable plug-and-socket connection System X-2000, the shielded high-voltage cable, the special stainless-steel electrodes and the convenience of being safe to touch.

The electrical capacity of the VS ionizing bar is three times as great as the standard version, and therefore, it is necessary to base any power pack load calculations on a bar length three times as long.

Example:

VS static bar - 50 cm with 200 cm cable
Power pack load: 3 x 50 cm + 200 cm = 350 cm

Explosion Proof Static Bars

Units for areas with potentially explosive atmospheres (ex zone)

For many years, HAUG has been a competent manufacturer of ionizing units approved for equipment in areas with potentially explosive atmospheres. These are intended to eliminate unwanted electrostatic charges in areas where hazardous gases may form, such as paint plants or printing machines.

Industries

Graphical industry: Screen, tampon and offset printing machines etc.
Paint shops: automotive paint applications, painting of plastic parts, etc.

Ionizing bars EI Ex T

The design of the ionizing bars EI Ex T complies with the International ATEX directivities. In combination with the power pack EN 92 Ex or Multistat Ex, it is suitable for use in manufacturing locations with potentially explosive atmospheres resulting from gases of explosion group IIA, temperature classes T4 to T6.

Further bars variations are available

These static bars can also be provided with high-voltage connection at the end of the bars for series connection of ionizing units (daisy-chain units end to end) or without HV-cable, suitable for connection of a flexible, separate high-voltage cable with elbows or tees – a variety of systems to "minimize" the need for excessive cable and extra power supplies, a significant advantage over competitive systems such as in "halo" blow-offs for paint lines where several static bars with air blades can be connected end to end.

Recommendation

HAUG ionizing bars are used with machines in the packaging, film, printing and textile industries, as well as many other industrial applications. It is recommended that two ionizing bars be installed above and below the material web.
The RN ionizing bars is suitable for feed speeds = 100 m/min.

PRODUCT OVERVIEW

The Static Meter electrofield meter is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volt. It perfectly combines easy operation with accurate measuring technique.

The Static Meter measures charges according to the field influence principle C: The influenced charges, caused by the electrical field, generate an alternating current proportional to the electrical field strength. The selective amplifier converts this value into the corresponding field strength or electrical potential - without withdrawing energy from the electric field over the averaged time.

Multicheck Model 80301

Multicheck Model 80301 - Tests if static bars and power supplies are working. The high-voltage test unit Multicheck is a performance testing unit for any power supply and for HAUG ionization units. Unlike cheap AC Testers which only show if power is going into power supplies or static bars, the Multicheck actually indicates if a power supply or bar is working. As you get close to the static bar, or power supply, a red light goeson indicating power to the unit, then if there is adequate voltage to make the system work,the light goes green.

A minimum voltage of 3600 volts is required to insure that a static elimination system is working. The Multicheck light will turn green if you have that voltage. AC Testers will NOT do this and are not an adequate indicator so be wary of marketing ploys which may offer AC testers as an accurate device for testing power supplies or static bars.

For testing power packs, the red measuring probe is inserted into the high-voltage socket as far as it will go. After pressing the red push button the LED will illuminate green if the unit functions correctly. In case of malfunction, the LED will illuminate in red or no display at all is visible

Haug Hand Held Static Meter Model 80302

Hand Held Static Meter Model 80302 - used to indicate static charge on parts, sheets and webs. The Hand Held "Static Control" meter is reasonably priced and easy to handle. It is operated using an ON/OFF soft key (with circuit-breaker) and two further soft keys for the 0-100 and 0-1000 kV/m measuring ranges. The meter is battery powered. It should be part of any basic equipment of every electrical engineering workshop. It is rugged and durable for use in all types of plants operations.

Haug Hand Held Static 1 Digital Static Meter

Hand Held Static 1 Digital Static Meter Model 80303 - The Static 1 is a small hand-held field strength meter with digital display for measuring electrostatic charges in Volts and is used if more accurate readings are required than with the standard hand held meter. In order to obtain optimum results, the distance between test object and sensor head - depending on the degree of charge and the condition of the objects' surface - can be selected incrementally. The device is equipped with a Hold function to keep the measured value stored on the display. The integrated micro-computer automatically converts the measured field
strength into the equivalent charge in Volt